The safety measures to prevent sparks and fire when cutting stainless steel pipes are as follows:

(1) When welding stainless steel pipes, in addition to wearing regular protective equipment such as work clothes and masks, workers should also wear work hats or shawl work hats to protect their necks, especially when welding upside down.

(2) Tighten the foot covers to prevent splashing stainless steel sparks from burning the skin or shoes and socks.

(3) Flammable and explosive materials are strictly prohibited from being stored within 5 meters of the welding site; When working at heights with stainless steel seamless pipes, attention should be paid to preventing stainless steel sparks from splashing and injuring personnel below, causing accidents such as fires. Someone should handle it.

2. Safety measures to prevent explosions and other accidents During the welding process of stainless steel pipes, the following safety measures should be taken to prevent explosions and other accidents:

(1) It is strictly prohibited to weld stainless steel containers and pipelines under pressure.

(2) When welding containers (such as fuel tanks, etc.) Once certain flammable materials are released, the medium in the stainless steel pipe must be properly drained before welding, thoroughly rinsed with alkaline and hot water, and confirmed to be correct before welding can proceed.

(3) When welding acetylene generators, it is necessary to use clean water, 304 stainless steel seamless pipes, and conduct explosion tests under open flame contact before welding. Welding can only be carried out after confirming that there is no explosion.

(4) When handling and removing welding slag by flipping the welded parts, gloves and smooth glasses should be worn to prevent collision and burns.

(5) When working at heights of more than 3 meters, qualified safety belts must be used, and welding cables must be tied to the fixed frame, not on the back.

(6) When welding stainless steel pipes at heights. Strong escalators or scaffolding should be used, and anti slip measures should be taken. Do not place stools or other smooth and unstable objects at the foot of the escalator.